Skip to content
Expodite

Export regulation updates

Search every update

Search all types at once, or narrow by type, market and date.

RSS feed
Clear filters

Matching updates

159 updates match · Page 7 of 8

  1. WTO notificationEgyptSPSCorrected since it was notified

    Ministerial Decree No. 248/2025 that gives the producers and importers a six-month transitional period to abide by the Egyptian Standard ES 8390 'General Standard for Cheese'

    This standard applies to all products, intended for direct consumption or further processing, in conformity with the definition of cheese in this standard. Producers and importers are kept informed of any amendments in the Egyptian standards through the publication of administrative orders in the…

    Symbol: G/SPS/N/EGY/167/Corr.1Comment period closed

  2. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 3190-3 for ' Plain bearings – Wrapped bushes - Part 3: Lubrication holes, grooves and indentations'

    This draft of Egyptian standard specifies dimensions of lubrication holes, grooves and bore indentations on wrapped bushes made of mono and multi-layer bearing material for plain bearing applications. Worth mentioning is that this draft standard adopts the technical content of ISO 3547-3:2017

    Symbol: G/TBT/N/EGY/522/Add.1Comment period closed

  3. WTO notificationEgyptTBTProposed measure, may since have been adopted

    The Ministerial Decree No. 246/2025 (5 page(s), in Arabic) mandating the Egyptian Standard ES 4859 ' Rolling bearings- Plummer block housings — Boundary dimensions '

    The Ministerial Decree No. 246/2025 gives the producers and importers a six-month transitional period to abide by the Egyptian standard ES 4859 which specifies boundary dimensions for two-bolt plummer block housings primarily intended for rolling bearings in diameter series 0, 1, 2 and 3, as…

    Symbol: G/TBT/N/EGY/553Comment period closed

  4. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 6469 'Plain bearings — Tin casting alloys for multilayer plain bearings'

    This draft of Egyptian standard specifies requirements for bearing metals based on tin casting alloys for multilayer plain bearings. The chemical composition and material properties refer to the original unprocessed material and are measured on representative samples. Testing results on final…

    Symbol: G/TBT/N/EGY/500/Add.1Comment period closed

  5. WTO notificationEgyptTBTProposed measure, may since have been adopted

    The Ministerial Decree No. 246/2025 (5 page(s), in Arabic) mandating the Egyptian Standard ES 3553 ' Rolling bearings — Dynamic load ratings and rating life '.

    The Ministerial Decree No. 246/2025 gives the producers and importers a six-month transitional period to abide by the Egyptian standard ES 3553 which specifies methods of calculating the basic dynamic load rating of rolling bearings within the size ranges shown in the relevant ISO publications…

    Symbol: G/TBT/N/EGY/552Comment period closed

  6. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 3290 for 'Plain bearings – Sintered bushes – Dimensions and tolerances'

    This draft of Egyptian standard specifies the dimensions and tolerances applicable to sintered bearings for the following ranges of inside diameters: Cylindrical bearings: 1 mm to 60 mm; Flanged bearings: 1 mm to 60 mm; Spherical bearings: 1 mm to 20 mm. Worth mentioning is that this draft…

    Symbol: G/TBT/N/EGY/525/Add.1Comment period closed

  7. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 3421-2 for 'Rolling Bearings – Accessories - Part 2: Dimensions for locknuts and locking devices'

    This draft of Egyptian standard specifies: Dimensions of locknuts. Runout tolerance of locknut clamp face with respect to pitch diameter of screw thread. Dimensions of lock washers with straight inner tab for use with 4-slot locknuts. Dimensions of locking clip assemblies for use with 8-slot…

    Symbol: G/TBT/N/EGY/527/Add.1Comment period closed

  8. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Ministerial Decree No. 250/2022 (1 page, in Arabic) mandating the Egyptian Standard ES 3368/2020 for 'Road Vehicles - Vehicle Identification Number (VIN) - Content and Structure'

    The Ministerial Decree No. 250 /2022 gives the producers and importers a six-month transitional period to abide by the Egyptian standard ES 3368/2020 which applies to motor vehicles, towed vehicles, motorcycles and mopeds as defined in ISO 3833. This standard cancels and supersedes its last…

    Symbol: G/TBT/N/EGY/325/Add.3Comment period closed

  9. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 3644 for 'paper products (tissue paper)'

    This draft standard specifies the requirements of paper products (tissue paper), including: facial tissues, toilet rollers, kitchen rollers and for household purposes. Worth mentioning is that this draft standard complies with: - Tissue paper kitchen towels and napkins Version 1 – 22.09.2004…

    Symbol: G/TBT/N/EGY/232/Add.3Comment period closed

  10. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 3190-4 'Plain bearings – Wrapped bushes – Part 4: Materials'

    This draft of Egyptian standard gives specifications for solid and multi-layer bearing materials, such as those used for wrapped bushes in accordance with the other parts of ISO 3547. Worth mentioning is that this draft standard adopts the technical content of ISO 3547-4:2017.

    Symbol: G/TBT/N/EGY/523/Add.1Comment period closed

  11. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 3217 'Plain bearings — Ring type thrust washers made from strip — Dimensions and tolerance '

    This draft of Egyptian standard specifies a range of ring type thrust washers for general purpose use with wrapped bushes as specified in ISO 3547 (all parts).It applies to thrust washers having inside diameters from 6 to 80 mm. Worth mentioning is that this draft standard adopts the technical…

    Symbol: G/TBT/N/EGY/524/Add.1Comment period closed

  12. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 1497 for ' Rolling bearings — Static load ratings'

    This draft of Egyptian standard specifies methods of calculating the basic static load rating and the static equivalent load for rolling bearings within the size ranges shown in the relevant ISO standards, manufactured from contemporary, commonly used, high quality, hardened bearing steel in…

    Symbol: G/TBT/N/EGY/518/Add.1Comment period closed

  13. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 4996 'Rolling bearings — Tapered roller bearings — Designation system'

    This draft of Egyptian standard establishes a system for the designation of metric size tapered roller bearings produced in accordance with ISO 355. The system covers designations for single-row bearings, double-row bearings, and bearings with flanged outer rings. ISO 10317:2008 also establishes…

    Symbol: G/TBT/N/EGY/505/Add.1Comment period closed

  14. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 535 for ' Rolling bearings — Radial bearings — Boundary dimensions, general plan'

    This draft of Egyptian standard specifies preferred boundary dimensions for radial bearings of the diameter series 7, 8, 9, 0, 1, 2, 3 and 4. Worth mentioning is that this draft standard adopts the technical content of ISO 15:2017(confirmed in 2022)

    Symbol: G/TBT/N/EGY/507/Add.1Comment period closed

  15. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Ministerial Decree No. 241/2016 (3 pages, in Arabic) mandating Egyptian Standards on Household and Similar Electrical Appliances.

    This decree mandates that the producers and importers of household and similar electrical appliances must comply with the following relevant Egyptian Standards: ES NO. 2501/2016 for Audio, video and similar electronic apparatus – safety requirements; ES NO. 4751/2016 for 'Clothes washing machines…

    Symbol: G/TBT/N/EGY/157/Add.11Comment period closed

  16. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 536 for ' Rolling bearings - thrust bearings -boundary dimensions, general plan'

    This draft of Egyptian standard specifies preferred boundary dimensions for single-direction and double-direction thrust bearings with flat back faces. In addition, it gives the minimum bore diameters of housing washers and maximum outside diameters of shaft washers of bearings in dimension series…

    Symbol: G/TBT/N/EGY/508/Add.1Comment period closed

  17. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 4997 'Rolling bearings — Single-row cylindrical roller bearings — Chamfer dimensions for loose rib and non-rib sides '

    This draft of Egyptian standard specifies the minimum chamfer dimensions for loose rib and non-rib sides of single-row cylindrical roller bearings of diameter series 0, 2, 3, and 4 (except dimension series 24) as specified in ISO 15. Indication is given for those minimum chamfer dimensions that…

    Symbol: G/TBT/N/EGY/503/Add.1Comment period closed

  18. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 4961 'Rolling bearings - Chamfer dimensions - Maximum values'

    This draft of Egyptian standard specifies the maximum chamfer dimensions of metric series rolling bearings, for which boundary dimensions, including chamfer minimum dimensions, are given in other International Standards. Gives also requirements for the maximum dimensions of the corresponding shaft…

    Symbol: G/TBT/N/EGY/534/Add.1Comment period closed

  19. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of Egyptian standard ES 4981 'Rolling bearings — Needle rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values '

    This draft of Egyptian standard specifies dimensional and geometrical characteristics, nominal boundary dimensions and tolerance values for finished steel needle rollers used as rolling elements. Worth mentioning is that this Draft standard adopts the technical content of ISO 3096:2018 (confirmed…

    Symbol: G/TBT/N/EGY/516/Add.1Comment period closed

  20. WTO notificationEgyptTBTUpdated: check whether it is now adopted or in force

    Draft of the Egyptian Standard ES for 'Child use and care articles – carry cots and stands – safety requirements and test methods'

    This draft Standard specifies safety requirements and test methods for products which are intended for the purpose of carrying a child in a lying position by means of handle(s) and for stands which may be used in conjunction with these products (see C.2). These products are intended for a child…

    Symbol: G/TBT/N/EGY/359/Add.3Comment period closed

Get these automatically for your products and markets.

Expodite matches each notification to the markets you export to and the HS codes of your products, and puts the ones that concern you in your Updates centre, with the date comments close.

Start freeSee export intelligence