Skip to content

WTO notification · TBT

United StatesAdopted, according to its latest notice

Toys and entertainment equipment – United States

Official title

Safety Standard for Toys: Requirements for Water Beads

The United States issued an addendum on 15 December 2025 to the earlier TBT notification G/TBT/N/USA/2146. Addenda often report that a measure was adopted, changed, postponed or withdrawn. The measure was first notified on 10 September 2024. The comment period closed on 8 December 2024.

Expodite puts notifications like this one in your Updates centre, matched to the HS codes of your products and the markets you export to. Opens the requirements check for the United States in your Expodite account.

Source: WTO ePing (opens in a new tab). Summaries by Expodite, which is independent of the WTO.

Published here:

Updated here:

At a glance

Products

Water bead toys and toys that contain water beads. A toy is defined as 'any object designed, manufactured, or marketed as a plaything for children under 14 years of age'. Product and company certification. Conformity assessment; Toys

Notifying member
United States(United States of America)
Status
Adopted, according to its latest notice
Objectives
  • Consumer information, labelling
  • Prevention of deceptive practices and consumer protection
  • Protection of human health or safety
  • Quality requirements
Area
TBT: Technical product rulesTechnical barriers to trade
Notification type
Regular notification
Document symbol
G/TBT/N/USA/2146Latest notice: G/TBT/N/USA/2146/Add.2
ICS classification
  • 97.200.50 Toys

Key dates

Distributed by the WTO
Comment deadline
Closed on 8 December 2024
Proposed adoption
To be determined
Proposed entry into force
To be determined

What the notification says

Latest notice (⁨G/TBT/N/USA/2146/Add.2⁩, 15 December 2025)

The latest notice says the measure was adopted or published.

Safety Standard for Toys: Requirements for Water Beads

Section 106(a) of the Consumer Product Safety Improvement Act of 2008 (CPSIA) mandates that ASTM F963 shall be a mandatory toy safety standard. This safety standard sets forth requirements for water bead toys and toys that contain water beads. Under this statutory authority, the U.S. Consumer Product Safety Commission (CPSC or Commission) is issuing a safety standard for water bead toys and toys that contain water beads. The rule is effective on 12 March 2026. The incorporation by reference of the publication listed in this rule is approved by the Director of the Federal Register as of 12 March 2026. The incorporation by reference of certain other material listed in this rule was approved for use by the Director of the Federal Register as of 20 April 2024. 90 Federal Register (FR) 57820, 12 December 2025; Title 16 Code of Federal Regulations (CFR) Part 1250: This final rule and previous actions notified under the symbol G/TBT/N/USA/2146 are identified by Docket Number CPSC-2024-0027. The Docket Folder is available from Regulations.gov at and provides access to primary documents as well as comments received. Documents are also accessible from Regulations.gov by searching the Docket Number.

Notice of proposed rulemaking - The Consumer Product Safety Improvement Act of 2008 (CPSIA) mandates that ASTM F963 shall be a mandatory toy safety standard. This safety standard sets forth requirements for water bead toys and toys that contain water beads. The U.S. Consumer Product Safety Commission (CPSC) proposes to establish additional performance and labeling requirements for these products. The Commission also proposes to amend CPSC's list of notice of requirements (NORs) to include water bead toys and toys that contain water beads.

Notices on this measure

Every notice about this measure published here, newest first. Each one is the notifying member's own text.

  1. AddendumG/TBT/N/USA/2146/Add.2

    Safety Standard for Toys: Requirements for Water Beads

    Section 106(a) of the Consumer Product Safety Improvement Act of 2008 (CPSIA) mandates that ASTM F963 shall be a mandatory toy safety standard. This safety standard sets forth requirements for water bead toys and toys that contain water beads. Under this statutory authority, the U.S. Consumer Product Safety Commission (CPSC or Commission) is issuing a safety standard for water bead toys and toys that contain water beads. The rule is effective on 12 March 2026. The incorporation by reference of the publication listed in this rule is approved by the Director of the Federal Register as of 12 March 2026. The incorporation by reference of certain other material listed in this rule was approved for use by the Director of the Federal Register as of 20 April 2024. 90 Federal Register (FR) 57820, 12 December 2025; Title 16 Code of Federal Regulations (CFR) Part 1250: This final rule and previous actions notified under the symbol G/TBT/N/USA/2146 are identified by Docket Number CPSC-2024-0027. The Docket Folder is available from Regulations.gov at and provides access to primary documents as well as comments received. Documents are also accessible from Regulations.gov by searching the Docket Number.

  2. CorrigendumG/TBT/N/USA/2146/Add.1/Corr.1

    Safety Standard for Toys: Requirements for Water Beads

    On 8 November 2024, the U.S. Consumer Product Safety Commission (CPSC) published an extension of the comment period for the Notice of Proposed Rulemaking: Safety Standard for Toys: Requirements for Water Beads. In this document, CPSC is correcting an incorrect heading in that document. Submit comments by 8 December 2024. 89 Federal Register (FR) 94630, 29 November 2024; Title 16 Code of Federal Regulations (CFR) Part 1250: This action and previous actions notified under the symbol G/TBT/N/USA/2146 are identified by Docket Number CPSC-2024-0027. The Docket Folder is available from Regulations.gov at and provides access to primary documents as well as comments received. Documents are also accessible from Regulations.gov by searching the Docket Number. WTO Members and their stakeholders are asked to submit comments to the USA TBT Enquiry Point by or before 4pm Eastern Time on 8 December 2024. Comments received by the USA TBT Enquiry Point from WTO Members and their stakeholders will be shared with CPSC and will also be submitted to the Docket on Regulations.gov if received within the comment period.

  3. AddendumG/TBT/N/USA/2146/Add.1

    Comment deadline: Closed on 8 December 2024

    Safety Standard for Toys: Requirements for Water Beads

    On 9 September 2024, the Consumer Product Safety Commission (CPSC) published in the Federal Register a notice of proposed rulemaking (NPR) (notified as G/TBT/N/USA/2146) to address the risk of death and injury associated with children ingesting or inserting in the nose or ear water bead toys by adding performance and labeling requirements for water bead toys or toys containing water beads. The Commission also made public incident data relied upon and referenced in the NPR. The NPR invited the public to submit written comments by 8 November 2024. On 21 October 2024, CPSC received a request to extend the comment period to provide stakeholders with time to review additional testing data. The Commission is extending the comment period for the NPR by 30 days. The comment period for the proposed rule published on 9 September 2024, at 89 FR 73024, is extended. Submit comments by 8 December 2024. 89 Federal Register (FR) 88684, 8 November 2024; Title 16 Code of Federal Regulations (CFR) Part 1250: This extension of comment period for the notice of proposed rulemaking notified as G/TBT/N/USA/2146 is identified by Docket Number CPSC-2024-0027. The Docket Folder is available from Regulations.gov at and provides access to primary documents as well as comments received. Documents are also accessible from Regulations.gov by searching the Docket Number. WTO Members and their stakeholders are asked to submit comments to the USA TBT Enquiry Point by or before 4pm Eastern Time on 8 December…

  4. Regular notificationG/TBT/N/USA/2146

    Comment deadline: Closed on 8 November 2024

    Safety Standard for Toys: Requirements for Water Beads

    Notice of proposed rulemaking - The Consumer Product Safety Improvement Act of 2008 (CPSIA) mandates that ASTM F963 shall be a mandatory toy safety standard. This safety standard sets forth requirements for water bead toys and toys that contain water beads. The U.S. Consumer Product Safety Commission (CPSC) proposes to establish additional performance and labeling requirements for these products. The Commission also proposes to amend CPSC's list of notice of requirements (NORs) to include water bead toys and toys that contain water beads.

Sources

Expodite writes its summary from the official record. The notification and the documents it notifies are on the WTO's own websites.

All updates from the United States
  1. WTO notificationTBTAdopted, according to its latest notice

    Significant New Use Rules on Certain Chemical Substances (25- 3.5e)

    Proposed rule - The Environmental Protection Agency (EPA) is proposing significant new use rules (SNURs) under the Toxic Substances Control Act (TSCA) for certain chemical substances that were the subject of premanufacture notices (PMNs) and are also subject to an Order issued by EPA pursuant to…

    Symbol: G/TBT/N/USA/2289/Add.2Comment period closed

  2. WTO notificationTBTAdopted, according to its latest notice

    Space Bureau Seeks Comment on GSO Reference Links

    Proposed rule - In this document, the Space Bureau (Bureau or we) within the Federal Communications Commission (Commission) seeks comment on potential revisions to the set of geostationary (GSO) satellite network reference links adopted in the Modernizing Spectrum Sharing for Satellite Broadband…

    Symbol: G/TBT/N/USA/2217/Rev.1/Add.1Comment period closed

  3. WTO notificationTBTProposed measure, open for comments

    Pipeline Safety: Amendments to Liquefied Natural Gas Facilities

    Notice of proposed rulemaking - The Pipeline and Hazardous Materials Safety Administration (PHMSA) proposes updating its regulations for liquefied natural gas (LNG) facilities to incorporate by reference the most recent industry safety standards and to make other changes to account for more than…

    Symbol: G/TBT/N/USA/2329Comments until 4 January 2027

  4. WTO notificationTBTProposed measure, open for comments

    Significant New Use Rules on Certain Chemical Substances (26-7)

    Proposed rule - The Environmental Protection Agency (EPA) is proposing significant new use rules (SNURs) under the Toxic Substances Control Act (TSCA) for certain chemical substances that were the subject of premanufacture notices (PMNs) and are also subject to an Order issued by EPA pursuant to…

    Symbol: G/TBT/N/USA/2328Comments until 2 December 2026

All export regulation updates

Get these automatically for your products and markets.

Expodite matches each notification to the markets you export to and the HS codes of your products, and puts the ones that concern you in your Updates centre, with the date comments close.